Woodward MRM4, Руководство пользователя

Страница: 85 / 460

Input, Output and LED Settings
Name Description Assignment via
BO5.5 Module input state: Assignment [Device Para
/Binary Outputs
/BO-5 X2
/BO 5]
BO5.6 Module input state: Assignment [Device Para
/Binary Outputs
/BO-5 X2
/BO 5]
BO5.7 Module input state: Assignment [Device Para
/Binary Outputs
/BO-5 X2
/BO 5]
Ack signal BO 5 Module input state: Acknowledgement
signal for the binary output relay. If latching
is set to active, the binary output relay can
only be acknowledged if those signals that
initiated the setting are fallen back and the
hold time is expired. [Device Para
/Binary Outputs
/BO-5 X2
/BO 5]
Signals of the Binary Output Relays on OR-5 X
Name Description
BO 1 Signal: Binary Output Relay
BO 2 Signal: Binary Output Relay
BO 3 Signal: Binary Output Relay
BO 4 Signal: Binary Output Relay
BO 5 Signal: Binary Output Relay
DISARMED! Signal: CAUTION! RELAYS DISARMED in order to safely perform
maintenance while eliminating the risk of taking an entire process
off-line. (Note: The Self Supervision Contact cannot be disarmed).
YOU MUST ENSURE that the relays are ARMED AGAIN after
maintenance
Outs forced Signal: The State of at least one Relay Output has been set by
force. That means that the state of at least one Relay is forced
and hence does not show the state of the assigned signals.
EN MRM4 01/11 Page 85