Woodward MRM4, Руководство пользователя, Страница: 129 / 460

Smart View
Smart View Persistent Connection Problems
In case of persistent connection problems you should remove all connection settings and establish them again
afterwards. In order to remove all connection settings please proceed as follows:
1. Remove the settings for the Dial-up Network
•
Close Smart View.
•
Call up the »Control Panel«.
•
Choose »Network & Internet«.
•
On the left side click on »Manage Network Connections«.
•
Click on HighPROTEC Direct Connection with the right hand mouse key.
•
Choose Delete from the shortcut menu.
•
Click on the OK button.
2. Remove the virtual modem
•
Call up the »Control Panel«.
•
Choose »Hardware & Sound«.
•
Choose »Phone & Modem Options«.
•
Go to Tab Modem.
•
Click on the correct (in case there is more than one) entry Connection cable between two computers.
•
Click on the Remove button.
Loading of Device Data When Using Smart View
•
Starting of the Smart View.
•
Make sure the connection has been established properly.
•
Connect your PC with the device via a zero-modem cable .
•
Select »Receiving Data From The Device« in menu »Device«.
EN MRM4 01/11 Page 129