Woodward MRM4, Руководство пользователя

Страница: 101 / 460

Input, Output and LED Settings
The »System OK« LED
This LED flashes green while the device is booting. After completed booting, the LED for System OK lights up in
green thus signalizing that the protection (function) is » activated« . If, however, in spite of successful booting, or
after the third unsuccessful reboot caused by the module self supervision the System OK – LED flashes in red
or is red illuminated, please contact the Woodward Kempen GmbH – Service Dept (See also chapter Self
Supervision).
LED System OK cannot be parametrized
Global Protection Parameters of the LED Module
LED
Parameter Description Setting range Default Menu path
Latched Defines whether the LED
will be latched when it
picks up. inactive,
active
active [Device Para
/LEDs
/LED 1]
Ack signal Acknowledgement signal
for the LED. If latching is
set to active the LED can
only be acknowledged if
those signals that
initiated the setting are
no longer present.
Dependency Only
available if: Latched =
active
1..n, Assignment List -.- [Device Para
/LEDs
/LED 1]
LED active color The LED lights up in this
color if the state of the
OR-assignment of the
signals is true. green,
red,
red flash,
green flash,
-
red [Device Para
/LEDs
/LED 1]
LED inactive color The LED lights up in this
color if the state of the
OR-assignment of the
signals is untrue. green,
red,
red flash,
green flash,
-
- [Device Para
/LEDs
/LED 1]
Assignment 1 Assignment 1..n, Assignment List CB.TripCmd [Device Para
/LEDs
/LED 1]
Inverting 1 Inverting of the state of
the assigned signal. inactive,
active
inactive [Device Para
/LEDs
/LED 1]
EN MRM4 01/11 Page 101