Weq CTW900, Руководство пользователя

Страница: 133 / 144

Detailed Description of the Parameters .
CTW900 | 133
Description:
It indicates the energy consumed by the motor.
This value is kept even when the converter is powered down. If you wish to reset this parameter, set P0204 = 2.
NOTE!
The value indicated in this parameter is calculated indirectly, and should not be used to measure
the energy consumption.
P0046 – Total Speed Reference
Adjustable Range: -10000 to 10000 rpm Factory Setting:
Properties: RO
Groups of 09 READ ONLY PARAMETERS
Access via HMI:
Description:
This parameter displays the value of the total speed reference, which is the ramp output reference added to
possible additional references via analog input and also with the JOG+ and JOG- references.
For further details, check the Speed Reference block diagram in Figure 7.3.
P0047 – Torque Auxiliary Reference
Adjustable Range: 0.0 to 125.0 % Factory Setting:
Properties: RO
Groups of 09 READ ONLY PARAMETERS
Access via HMI:
Description:
This parameter displays the value of the torque auxiliary reference when some analog input is configured for the
“Current Auxiliary Reference” (P0231/P0236/P0241/P0246 = 2).
For further details, refer to Figure 7.7.
P0048 – Present Alarm
P0049 – Present Fault
Adjustable Range: 0 to 999 Factory Setting:
Properties: RO
Groups of 09 READ ONLY PARAMETERS
Access via HMI:
Description:
It indicates the alarm (P0048) or the fault (P0049) number that may occasionally be present on the converter.
In order to understand the meaning of the codes used for the faults and alarms, refer to chapter 2 and/or
section 7.3.18.
P0098 – Phase Sequence
Adjustable Range: 0 = RST Factory Setting:
1 = RTS
Properties: RO
Groups of 09 READ ONLY PARAMETERS
Access via HMI:
Description:
It indicates the phase sequence of the power supply.