Weq CTW900, Руководство пользователя

Страница: 54 / 144

Start-up .
54 | CTW900
6.2.1 Password Setting in P0000
In order to change the content of the parameters, it is necessary to set correctly the password in P0000, as
indicated below. Otherwise, the content of the parameters will be available only for viewing.
Seq. Action/Result Indication on the display Seq. Action/Result Indication on the display
1
- Monitoring Mode
- Press
“Menu” (left
soft key).
5
- If the setting is correct,
the display will show
“Access to Parameters
P0000: 5”
.
- Press “Return” (left
soft key)
2
- The group “00 ALL
PARAMETERS” is
already selected.
- Press
“Select” .
6 - Press “Return” .
3
- The parameter
“Access to
Parameters”
is
already selected.
- Press
“Select” .
7
- The display returns to
the Monitoring Mode.
4
- In order to set the
password, press
“

”
until number 5 shows
on the display
- When number 5
shows, press
“Save” .
Figure 6.1 – Sequence for allowing parameter change via P0000
It is possible to personalize the password by means of P0200. In order to do so, refer to the detailed description
of P0200 in Chapter 7.
6.2.2 Oriented Start-up
Aiming at facilitating the configuration of the application, the CTW900 offers an Oriented Start-up routine, which
displays on the keypad a sequence of the main parameters to be set.
In order to enter the Oriented Start-up routine, follow the sequence presented in Figure 6.2, first setting
P0317=1 and then the other parameters as they are displayed on the keypad.
During the Oriented Start-up routine the “Config” (Configuration) status will be displayed on the top left corner of
the keypad, which prevents the operation of the converter while the settings are not finished.