Weq CTW900, Руководство пользователя

Страница: 87 / 144

Detailed Description of the Parameters .
CTW900 | 87
For options 2 and 3, the signal is treated the opposite way, that is, with the minimum value in the input you have
the maximum reference (or limitation).
7.3.13 Analog Outputs [33]
The CTW900 provides two analog outputs (AO1 and AO2) directly on its control board, with galvanic isolation
and resolution of 11 bits. In case more outputs or a greater resolution is needed, other two outputs (AO3 and
AO4) of 14 bits can be added by means of the accessory IOA-01.
Below is the detailed description of the parameter related to these outputs.
P0014 – AO1 Value
P0015 – AO2 Value
Adjustable Range: 0.00 to 100.00 % Factory Setting:
P0016 – AO3 Value
P0017 – AO4 Value
Adjustable Range: –100.00 to 100.00 % Factory Setting:
Properties: RO
Groups of 01 PARAMETER GROUPS or 07 I/O CONFIGURATION
Access via HMI:  33 Analog Outputs ........  33 Analog Outputs ........
Description:
Those read-only parameters indicate the value of the analog outputs AO1 to AO4 in percentage of the full scale.
The indicated values are those obtained after the multiplication by the gain.
Check the description of the parameters P0251 to P0262.
P0251 – Output AO1 Function
P0254 – Output AO2 Function
P0257 – Output AO3 Function
P0260 – Output AO4 Function
Adjustable 0 = Speed Reference Factory Setting: P0251 = 3
Range 1 = Reference after the Ramp P0254 = 7
2 = Total Reference P0257 = 2
3 = Effective Speed P0260 = 5
4 = Speed Error
5 = Speed Regulator Output
6 = Current Reference
7 = Armature Current
8 = Current Regulator Output
9 = Firing Angle
10 = Output Power
11 = Motor Torque
12 = SoftPLC
13 = Not used
14 = Armature Voltage
15 = Encoder Speed
16 = Field Current
17 = EMF
18 = Content of P0696
19 = Content of P0697
20 = Content of P0698
21 = Content of P0699