Weq CTW900, Руководство пользователя

Страница: 103 / 144

Detailed Description of the Parameters .
CTW900 | 103
P0027 – Configuration of Accessories 1
P0028 – Configuration of Accessories 2
Adjustable Range: 0000h to FFFFh Factory Setting:
Properties: RO
Groups of 01 PARAMETER GROUPS
Access via HMI:

36 Drive Data ........
Description:
These parameters identify, by means of a hexadecimal code, the accessories that are installed on the control
module.
For the accessories installed in the slots 1 and 2, the identification code is informed in parameter P0027. In case
of modules connected to slots 3, 4 or 5, the code will be shown through parameter P0028.
The following table shows the codes informed in these parameters regarding the accessories of the CTW900.
Table 7.16 – Identification codes for the accessories of the CTW900
Name Description Slot
Identification Code
P0027 P0028
IOA-01
Module with 1 analog input of 14 bits, 2 digital inputs, 2 analog outputs of 14 bits in
voltage or current, 2 digital outputs of the open connector type.
1 FD-- ----
IOB-01
Module with 2 isolated analog inputs, 2 digital inputs, 2 isolated analog outputs in
voltage and current, 2 open collector digital outputs.
1 FA-- ----
ENC-01
Incremental encoder module, 5 to 12 Vdc, 100kHz, with repeater of the encoder
signals.
--C2 ----
ENC-02 Incremental encoder module, 5 to 12 Vdc, 100 kHz. --C2 ----
RS-485-01 RS-485 serial communication module. 3 ---- CE--
RS-232-01 RS-232C serial communication module. 3 ---- DC--
RS-232-02
RS-232C serial communication module with switch to program the microcontroller
FLASH memory.
3 ---- CC--
PROFIBUS DP-05 Profibus DP interface module. 4 ---- ----
(2)
DEVICENET-05 Devicenet interface module. 4 ---- ----
(2)
ETHERNET IP-05 EtherNet interface module. 4 ---- ----
(2)
RS-232-05 RS-232 interface module. 4 ---- ----
(2)
RS-485-05 RS-485 interface module. 4 ---- ----
(2)
MMF-03 Flash memory module. 5 ---- ----
(1)
For the Anybus-CC communication modules (slot 4) and for the FLASH memory module, the identification code
in P0028 will depend on the combination of these accessories, as shown in the following table.
Table 7.17 – Formation of the two first codes of parameter P0028
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0
FLASH
Memory
Module
Anybus-CC Modules
01 = Active Module
10 = Passive Module
0 0 0 0
2nd Hexa Code 1st Hexa Code
(1)
Bit 6: indicates the presence of the FLASH memory module (0 = without memory module, 1 = with memory module).
(2)
Bit 5 and 4: indicate the presence of active or passive Anybus-CC modules (see the classification in the Table 7.18).
Table 7.18 – Types of Anybus-CC modules
Bit 5 Bit 4 Module Type Name
0 1 Active PROFIBUS DP-05, DEVICENET-05, ETHERNET IP-05
1 0 Passive RS-232-05, RS-485-05
Bits 3, 2, 1 and 0: are fixed at 0000, and always form the code “0” in hexadecimal.
Example: For a converter equipped with the modules IOA-01 ENC-02, RS485-01, PROFIBUS DP-05 and
FLASH memory module, the hexadecimal code presented in parameters P0027 and P0028 must be
FDC2 and CE50 (Table 7.19).