Weq CTW900 Скачать руководство пользователя

Страница: 28 / 144

Safety Instructions

28 | CTW900

SAFETY INSTRUCTIONS

This manual contains information necessary for the correct programming of the converter CTW900.

It was written to be used by people with proper technical training or qualification to operate this kind of
equipment.

3.1

SAFETY WARNINGS IN THE MANUAL

In this manual are used the following safety warnings:

DANGER!

The not following of the procedures recommended in this warning can lead to death, serious
injuries and considerable material damages.

ATTENTION!

The not following of the procedures recommended in this warning can lead to material damages.

NOTE!

The text aims at providing important information for the full understanding and proper operation of
the product.

3.2

SAFETY WARNINGS ON THE PRODUCT

The following symbols are fixed to the product, as a safety warning:

High voltages present.

Components sensitive to electrostatic discharges.
Do not touch them.

Mandatory connection to the protection ground (PE).

Connection of the shield to the ground.

Содержание CTW900

















































































































































Результаты поиска

Содержание CTW900

Отзывы:

Похожие инструкции для CTW900

Бренды по названию

Популярные бренды

Weq CTW900, Руководство пользователя

Результаты поиска

Содержание CTW900

Отзывы:

Похожие инструкции для CTW900

Бренды по названию

Популярные бренды