Weq CTW900, Руководство пользователя

Страница: 93 / 144

Detailed Description of the Parameters .
CTW900 | 93
Notes:
■
Make sure that when using these functions, the parameter groups (User’s Memory 1, 2 and 3) are totally
compatible with the application (motors, command Start/Stop, etc);
■
With the converter running (“Run”, “Up Ramp” or “Down Ramp” status) it will be not possible to load the
user’s memory;
■
If two or three different motor parameter groups are saved on the user’s memory 1, 2 and/or 3, the correct
current values must be set in parameters P0156 and P0157 for each user.
Trace Function: It triggers the data acquisition of the channels selected with this function when the three
conditions below are met:
■
DIx set to 24 V;
■
trigger condition for the Trace configured for DIx (P0552 = 6);
■
status of the Trace function in “Waiting” (P0576 = 1).
For further details, refer to section 7.3.21.