Weq CTW900, Руководство пользователя

Страница: 97 / 144

Detailed Description of the Parameters .
CTW900 | 97
7.3.15 Digital / Relay Outputs [35]
For the implantation of the protection and interlock logics, the CTW900 has three digital relay outputs on its
control board, and two more open collector outputs on the accessories IOA-01 and IOB-01.
Below is the detailed description of the parameters related to these outputs.
P0013 – Status of the Digital Outputs DO5 to DO1
Adjustable Range: Bit 0 = DO1 Factory Setting:
Bit 1 = DO2
Bit 2 = DO3
Bit 3 = DO4
Bit 4 = DO5
Properties: RO
Groups of 01 PARAMETER GROUPS or 07 I/O CONFIGURATION
Access via HMI:

35 Digital Outputs ........

35 Digital Outputs ........
Description:
By means of this parameter it is possible to view the status of the three control board digital outputs (DO1 to
DO3) and of the two optional board digital outputs (DO4 and DO5).
The indication is done by means of the numbers "1" and "0", representing, respectively, the “Active” and
“Inactive” status of the outputs. The status of each output is considered as one digit in the sequence, where
DO1 represents the least significant digit.
Example: In case the sequence 00010010 is displayed on the keypad, it will correspond to the following status
of the DOs:
Table 7.14 – Status of the digital outputs
P0275 – Output DO1 Function (RL1)
P0276 – Output DO2 Function (RL2)
P0277 – Output DO3 Function (RL3)
P0278 – Output DO4 Function
P0279 – Output DO5 Function
Adjustable Range: 0 = Not used Factory Setting: P0275 =13
1 = N* > Nx P0276 = 2
2 = N > Nx P0277 = 1
3 = N < Ny P0278 = 0
4 = N = N* P0279 = 0
5 = Zero Speed
6 = Ia > Ix
7 = Ia < Ix
8 = Torque > Tx
9 = Torque < Tx
10 = Remote
11 = Run
12 = Ready
13 = Without Fault
14 = With F003
15 = With F072
16 = With F077
17 = 4 to 20mA Ok
18 = Content of P0695
19 = Forward Direction
20 = With Fault
DO5 DO4 DO3 DO2 DO1
Active
(+24 V)
Inactive
(0 V)
Inactive
(deactivated coil)
Active
(activated coil)
Inactive
(deactivated coil)