Devices and Accessories
.
CTW900 | 139
9
DEVICES AND ACCESSORIES
The CTW900 has several accessories which can be added to the converter in a simple and fast way based on
the plug and play concept.
Therefore, when an accessory is connected to the expansion slots, the control circuit identifies the model and
informs the code of the accessory connected in P0027 and P0028.
The code for ordering and the kinds of available accessories are presented in Table 9.1 below. They may be
ordered separately, and will be shipped in individual packages containing the components and the manuals with
detailed instructions for the installation, operation and programming.
NOTE!
Only one accessory module can be used at a time in each slot, and they must be installed with the
converter powered down.
Table 9.1
– Models of the accessories
WEG
Item
Name
Description
Slot
(1)
Identification
Code
P0027
P0028
Control accessories to install in Slots 1, 2 and 3
11008162
IOA-01
IOA Module: 1 analog input of 14 bits in voltage and current;
2 digital inputs; 2 analog outputs of 14 bits in voltage and
current; 2 open collector digital outputs.
1
FD--
----
11008099
IOB-01
IOB Module: 2 isolated analog inputs in voltage and current;
2 digital inputs; 2 isolated analog outputs in voltage and
current; 2 open collector digital outputs.
1
FA--
----
11008100
ENC-01
Incremental encoder module, 5 to 12 Vdc, 100 kHz, with
repeater of the encoder signals.
2
--C2
----
11008101
ENC-02
Incremental encoder module, 5 to 12 Vdc, 100 kHz.
2
--C2
----
11008102
RS485-01
RS-485 serial communication module (Modbus).
3
----
CE--
11008103
RS232-01
RS-232C serial communication module (Modbus).
3
----
CC--
11008104
RS232-02
RS-232C serial communication module with switch to
program the microcontroller FLASH memory.
3
----
CC--
Anybus-CC Accessories to install in Slots 4
11008107
PROFDP-05
ProfibusDP interface module.
4
----
--x0
(2)
11008158
DEVICENET-05
Devicenet interface module.
4
----
--x0
(2)
10933688
ETHERNET/IP-05
EtherNet/IP interface module.
4
----
--x0
(2)
11550476
MODBUSTCP-05
Modbus TCP interface module.
4
----
--x0
(2)
11550548
PROFINETIO-05
PROFINET IO interface module.
4
----
--x0
(2)
11008160
RS232-05
RS-232 interface module (passive - Modbus).
4
----
--x0
(2)
11008161
RS485-05
RS-485 interface module (passive - Modbus).
4
----
--x0
(2)
Flash memory module for installation in slot 5
11719952
MMF-03
Flash memory module.
5
----
--x0
(2)
Separate Keypad, Blind Cover, Frame for External Keypad and Cables for Remote Keypad
11008913
HMI-01
Separate keypad.
Keypad
-
-
12127880
RHMIF-01
Frame kit for keypad (degree of protection IP56).
Keypad
-
-
11010298
HMID-01
Blind cover for slot of the keypad.
Keypad
-
-
10950192
HMI Cable 1 m
Cable set for serial remote keypad 1 meter.
-
-
-
10951226
HMI Cable 2 m
Cable set for serial remote keypad 2 meters.
-
-
-
10951223
HMI Cable 3 m
Cable set for serial remote keypad 3 meters.
-
-
-
10951227
HMI Cable 5 m
Cable set for serial remote keypad 5 meters.
-
-
-
10951240
HMI Cable 7.5 m
Cable set for serial remote keypad 7.5 meters.
-
-
-
10951239
HMI Cable 10 m
Cable set for serial remote keypad 10 meters.
-
-
-
(1) The location of each slot is shown in Figure 5.10.
(2) Refer to section 7.3.16 in order to check the logic of the identification code for these accessories.
Содержание CTW900
Страница 2: ......
Страница 52: ...Installation and Connection 52 CTW900 Figure 5 16 Connections in XC1 for configuration 4...
Страница 69: ...Detailed Description of the Parameters CTW900 69 Figure 7 3 Block diagram of the speed reference...
Страница 135: ...Detailed Description of the Parameters CTW900 135 Figure 7 21 Block diagram of the control of the CTW900...
