Weq CTW900, Руководство пользователя

Страница: 123 / 144

Detailed Description of the Parameters .
CTW900 | 123
P0319 – Copy Function of Keypad (HMI)
Adjustable Range: 0 = Inactive Factory Setting: 0
1 = CTW900

HMI
2 = HMI  CTW900
Properties: CFG1
Groups of Acess via HMI: 06 BACKUP PARAMETERS ...
Description:
The Copy Function of Keypad is similar to the previous function, and is also used to transfer the content of the
parameters from one CTW900 to another (others). The converters must have the same software version for the
transfer to be effected.
Table 7.25 – Options of parameter P0319
P0319 Action
0 Inactive : no action
1
CTW900

HMI : transfers the present content of the parameters of the CTW900 and of the user’s memories
1/2/3 to the nonvolatile memory of the keypad (EEPROM). The present parameters of the parameter remain
unchanged.
2
HMI  CTW900 : transfers the content of the nonvolatile memory of the keypad (EEPROM) to the present
parameters of the CTW900 and to the user’s memories 1/2/3.
NOTE!
In case the keypad (HMI) had been previously loaded with parameters from a version “different”
from that of the CTW900 where you are trying to copy the parameters to, the operation will not be
effected and the keypad (HMI) will display fault F082 (Copy Function Fault). It is understood as a
“different” version those which are different in “x” or “y”, assuming that the software version
numbering is described as Vx.yz.
Examples: Keypad Version
 V1.60 (x=1, y=6 and z=0).
a) CTW900 Version  V1.75 (x’=1, y’=7 and z’=5)
Action: P0319=2
Result: Fault F082 (y
 y’)
b) CTW900 Version  V1.62 (x’=1, y’=6 and z’=2)
Action: P0319=2
Result: Normal copy (y = y’ and x= x')
In order to copy the parameters from one CTW900 to another, you must proceed as follows:
1.
Connect the keypad (HMI) to the CTW900 from which you wish to copy the parameters (CTW900 n.1);
2. Set P0319=1 (Conv.

Keypad) to transfer the parameters of the CTW900 n.1 to the keypad;
3. Press the key right soft key “Save”. P0319 returns automatically to 0 (Inactive) as soon as the transfer is
finished;
4. Disconnect the keypad from the CTW900 n.1;
5. Connect the same keypad (HMI) to the CTW900 to which you want to transfer the parameters (CTW900
n.2);
6. Set P0319=2 (Keypad  Conv.) in order to transfer the content of the nonvolatile memory of the keypad
(EEPROM) to the CTW900 n.2;
7. Press the key right soft key “Save”. When P0319 returns to 0 the transfer of the parameters has been
finished. From that moment on the CTWs 1 and 2 will have the same parameter content;
8. In order to copy the parameter content from the CTW9001 to other CTWs, repeat the same steps 5 to 7
described above.