Detailed Description of the Parameters
.
130 | CTW900
0009
(%) =
0003
0401
× 100
%
For the case in which the motor is running above the rated speed, the calculation of torque must also take into
account the motor speed:
0009
(%) =
0003
0401
×
0402
0002
× 100
%
Note:
The torque will be negative if the motor is running in the reverse direction.
P0010 – Output Power
Adjustable Range:
0.0 to 6553.5 kW
Factory Setting:
Properties:
RO
Groups of
09 READ ONLY PARAMETERS
Access via HMI:
Description:
It indicates the instant output power of the converter, in kilowatt (kW), calculated by multiplying the armature
voltage (P0007) by the armature current (P0003).
NOTE!
The value indicated in this parameter must not be used to measure the energy consumption.
P0011 – Selected Bridge
Adjustable Range:
0 = Bridge A
Factory Setting:
1 = Bridge B
Properties:
RO
Groups of
09 READ ONLY PARAMETERS
Access via HMI:
Description:
It indicates the selected bridge for the triggering of the armature circuit. This selection is automatically done by
the control circuit of the CTW900, according to the needs of reverse or braking.
Note:
commutation to Bridge B only occurs in Antiparallel converter (CTW900
A
).
P0012 – DI8 to DI1 Status
Refer to the section 7.3.14.
P0013 – DO5 to DO1 Status
Refer to the section 7.3.15.
P0014 – Value of AO1
P0015 – Value of AO2
P0016 – Value of AO3
P0017 – Value of AO4
Refer to the section 7.3.13.
P0018 – Value of AI1
P0019 – Value of AI2
P0020 – Value of AI3
P0021 – Value of AI4
Refer to the section 7.3.12.
Содержание CTW900
Страница 2: ......
Страница 52: ...Installation and Connection 52 CTW900 Figure 5 16 Connections in XC1 for configuration 4...
Страница 69: ...Detailed Description of the Parameters CTW900 69 Figure 7 3 Block diagram of the speed reference...
Страница 135: ...Detailed Description of the Parameters CTW900 135 Figure 7 21 Block diagram of the control of the CTW900...
