Weq CTW900, Руководство пользователя

Страница: 120 / 144

Detailed Description of the Parameters .
120 | CTW900
P0575 – Second of the Trace Trigger
Adjustable Range: 00 to 59 Factory Setting:
Properties: RO
Groups of 01 PARAMETER GROUPS
Access via HMI:

41 Trace Function ........
Description:
P0572 to P0575 record the date and time of the occurrence of the trigger. These parameters and the points
collected by the Trace function are not saved when the converter is powered down.
In case the values of P0572 to P0575 are null, that indicates that no collections were made after the powering
up of the converter or that the Trace was done without the keypad connected to the converter (without RTC).
P0576 – Trace Function Status
Adjustable Range: 0 = Inactive Factory Setting:
1 = Waiting
2 = Trigger
3 = Concluded
Properties: RO
Groups of 01 PARAMETER GROUPS
Access via HMI:

41 Trace Function ........
Description:
It indicates if the Trace function was started, if a trigger has already occurred and if the signals have already
been completely collected.
7.4 ORIENTED START-UP [02]
P0317 – Oriented Start-Up
Adjustable Range: 0 = No Factory Setting: 0
1 = Yes
Properties: CFG2
Groups of Acess via HMI: 02 ORIENTED START-UP ...
Description:
The objective of the Start-Up function is to present a sequence minimally necessary to put the converter into
operation.
The parameters to be set and the sequence in which they are displayed are shown in Figure 6.2 of section
6.2.2.
The exit of Oriented Start-up routine can be done by means of the ‘Reset’ soft key or
key.
7.5 CHANGED PARAMETERS [03]
Groups of Access via HMI: 03 CHANGED PARAMEERS
.
All parameters with content different from the factory setting can be viewed in sequence in this menu.
7.6 BASIC APPLICATION [04]
Groups of Access via HMI: 04 BASIC APPLICATION
In this group are the parameters common to most applications.
For further details, refer to section 6.2.3.