Weq CTW900, Руководство пользователя

Страница: 88 / 144

Detailed Description of the Parameters .
88 | CTW900
Properties:
Groups of
01 PARAMETER GROUPS or 07 I/O CONFIGURATION
Access via HMI:  33 Analog Outputs ........  33 Analog Outputs ........
Description:
These parameters set the analog output functions, defining the signal that will be used for the writing in the
output.
The magnitude of the generated analog value depends on the full scale of each variable, as presented in Table
7.9.
Table 7.9 – Full scale of the analog outputs
Variable Full Scale (10V or 20mA)*
Speed reference
P0402, for P0202 = 0 (EMF)
P0134, for P0202 > 0 (Tacho or Encoder)
Reference after the Ramp
Total Reference
Effective Speed
Speed Error
Speed Regulator Output
Encoder Speed
Current Reference
1.25 x P0295 Armature Current (with filter of 0.1s)
Current Regulator Output
Firing Angle
180°
Output Power (with filter of 1.0s) P0400 x P0401
Motor Torque (with filter of 0.5s) 100 %
Armature Voltage
616 V, for P0400

600 V
821 V, for P0400  800 V
1231 V, for P0400 > 800 V
EMF
SoftPLC
32767
Content of P0696
Content of P0697
Content of P0698
Content of P0699
( * ) When the signal is inverse (10 to 0 V, 20 to 0 mA or 20 to 4 mA) the values in the table become the beginning of the scale.
P0252 – Output AO1 Gain
P0255 – Output AO2 Gain
P0258 – Output AO3 Gain
P0261 – Output AO4 Gain
Adjustable Range
0.000 to 9.999
Factory Setting:
1.000
Properties:
Groups of
01 PARAMETER GROUPS or 07 I/O CONFIGURATION
Access via HMI:

33 Analog Outputs ........

33 Analog Outputs ........
Description:
They set the gain of the analog outputs by multiplying the value of the selected variable so as to generate the
output signal.
See the representation of gain application in Figure 7.12