Detailed Description of the Parameters
.
66 | CTW900
Figure 7.1
– Actuation of the second ramp
In this example, the commutation to the second ramp (P0102 or P0103) is done by means of one of the digital
inputs DI1 to DI8, as long as it is set for the second ramp function (see the description of parameters P0263 to
P0270 for further details).
Note:
The setting to 0.0s means the ramp is disabled.
P0104 – S Ramp
Adjustable Range:
0 = Inactive
Factory Setting:
0
1 = 50 %
2 = 100 %
Properties:
Groups of
01 PARAMETER GROUPS
...
Access via HMI:
21 Ramps
Description:
This parameter allows the acceleration and deceleration ramps to have a non-linear profile, similar to an “S”, as
shown in Figure 7.2 below.
Figure 7.2
– S or linear Ramp
The objective of the S function Ramp is to reduce mechanical shocks during accelerations and decelerations.
Содержание CTW900
Страница 2: ......
Страница 52: ...Installation and Connection 52 CTW900 Figure 5 16 Connections in XC1 for configuration 4...
Страница 69: ...Detailed Description of the Parameters CTW900 69 Figure 7 3 Block diagram of the speed reference...
Страница 135: ...Detailed Description of the Parameters CTW900 135 Figure 7 21 Block diagram of the control of the CTW900...
