manualshive.com logo in svg

Viavi T-BERD MTS 5800, Руководство по началу работы

Поделиться
Скачать
Viavi T-BERD MTS 5800 Скачать руководство пользователя страница 83

Chapter 3  

Getting Started

Powering the instrument

 

T-BERD/MTS/SC Getting Started Guide

March 2018

22046537, Rev. 016

Page 59

Using the AC power adapter

To supply power using the AC power adapter

1

Verify that the AC power adapter is the one that shipped with your application 
module, DMC, 5800 or 4800 (see 

“Verifying that you have the correct adapter” on 

page 56

).

2

Plug the adapter into the power supply jack. 
–

The jack for the DMC is located on the bottom right-hand corner of the unit. 

–

The jack for the MSAM or CSAM is located on:
-

the top panel of the unit, or

-

the bottom right-hand corner of the DMC.

–

The jack for the T-BERD / MTS 5800 and SC 4800 families is located on the 
bottom right side of the unit.

3

Plug the opposite end of the adapter into the power mains.

Power is supplied using the adapter.

For specifications, see 

“Power supply specifications” on page 178

. 

Turning on the instrument

To power the instrument

•

Press the 

ON/OFF

 key.

The On LED, located on the front panel, illuminates green when the unit is powered, 
and the instrument beeps.

Turning off the instrument

To turn off the instrument

•

Press the 

ON/OFF

 key.

The On LED, located on the front panel, extinguishes when the unit turned off, and the 
instrument beeps.

Charging the battery

In most instances, the battery charges automatically when you supply power to your 
instrument using the AC power adapter. In some instances, the instrument may not 

Содержание T-BERD MTS 5800









































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды