Viavi T-BERD MTS 5800, Руководство по началу работы

Страница: 286 / 296

Appendix C Storage and Shipment
Storing the instrument
T-BERD/MTS/SC Getting Started Guide
Page 262 22046537, Rev. 016 March 2018
Storing the instrument
When the instrument is not in use, it can be stored. You should follow the criteria below
when storing the Dual Module Carrier, Transport Module, CSAM, MSAM, T-BERD/MTS
5800 and SC 4800.
Refer to “ “Maintaining the T-BERD/MTS 5800 and SC 4800 batteries” on page 245 ” for
guidelines related to battery storage.
Environmental specifications
The T-BERD/MTS 5800, SC 4800, and DMC should be stored according to the envi-
ronmental specifications listed in
Table 178 .
The CSAM, MSAM, and PIMs should be stored according to the environmental speci-
fications listed in
Table 179 .
Shipping the your instrument
If you will be shipping the instrument, you should follow the guidelines below.
Removing the component
If you are returning the Dual Module Carrier, Transport Module, and MSAM only (rather
than the entire assembly), remove the component before shipping. For instructions,
Chapter 2 “Assembling Your Instrument” .
Table 178 T-BERD/MTS 5800, SC 4800 and DMC storage specifications
Item Description
Storage Temperature -4 ° F to 140 ° F (-20 ° C to +60 ° C)
Humidity at 86 ° F (30 ° C) 10% to 95% relative humidity, non-condensing
Shock/drop height (non-operat-
ing) Meets requirements specified in IEC 721-3-7,
2nd Ed. for Class 7M3 products.
Table 179 CSAM, MSAM, and PIM storage specifications
Item Description
Storage Temperature -4
°
F to 140
°
F (-20
°
C to +60
°
C)
Humidity at 86
°
F (30
°
C) 10% to 95% relative humidity, non-condensing
Shock/drop height (non-operat-
ing) As published in the 6000A Base Unit
User Manual .