Viavi T-BERD MTS 5800, Руководство по началу работы

Страница: 137 / 296

Chapter 4 Basic Testing
Step 2: Configuring a test
T-BERD/MTS/SC Getting Started Guide
March 2018 22046537, Rev. 016 Page 113
The test is selected.
Step 2: Configuring a test
Configuring a test involves displaying the setup screens, specifying test settings, and
optionally saving the test setup.
Key settings are also available on the Main screen, on the Quick Config tabs. Changing
key settings while running a test (for example, changing the pattern transmitted) trig-
gers an automatic restart of the test.
Displaying the setup screens
To display the setup screens
1 Using the Test menu or Quick Launch screen, select a test application (see “Step
1: Selecting a test application” on page 109 ).
2 Select the Setup soft key.
The setup page appears and typically includes a series of tabs. The tabs
displayed vary based on the test application you selected. See
Figure 67
.
3 To navigate to a different setup screen, select the corresponding tab at the top of
the screen. For example, to display the Traffic setup screen, select the Traffic tab.
Figure 67 Setup Screen (Ethernet Settings tab for GFP testing)