Viavi T-BERD MTS 5800, Руководство по началу работы

Страница: 42 / 296

Chapter 1 Overview
About the MSAM Assembly
T-BERD/MTS/SC Getting Started Guide
Page 18 22046561, Rev. 016 March 2018
When you place an order for an MSAM, a customer service or sales representative will
help you determine the following:
• Whether you want to use the MSAM with a T-BERD ⁄ MTS 6000A base unit, or
with a T-BERD ⁄ MTS 8000 base unit with a Dual Module Carrier (DMC).
• The type of MSAM chassis required (for example, you can order a single or dual
port chassis that supports PIMs designed for 1.544 Mbps through 10 Gigabit
testing).
• The PIM (or PIMs) required for testing 1.544 Mbps through 10 Gigabit circuits. If
you ordered a dual port chassis and you intend to use both ports simultaneously
(for example, in dual port through mode), PIMs should be ordered for both ports.
• If you ordered an SFP or XFP PIM, the transceivers are required. A variety of
Viavi-approved SFP and XFP transceivers are available for each PIM.
The plug in panel of each MSAM provides one or more physical interface module (PIM)
ports. Before connecting the instrument to the circuit for testing, you must insert the
required PIMs into the ports, and then insert the appropriate SFPs or XFPs into the
transceiver cages provided on the PIMs.
Figure 11 T-BERD ⁄ MTS 6000AV2 with MSAM user interface