Viavi T-BERD MTS 5800, Руководство по началу работы

Страница: 248 / 296

Appendix A Specifications
Jitter and Wander specifications
T-BERD/MTS/SC Getting Started Guide
Page 224 22046537, Rev. 016 March 2018
Jitter and Wander specifications
Refer to the following sections for jitter and wander specifications for the T-BERD / MTS
5800 and MSAM:
• “Electrical jitter and wander specifications” on page 224
• “Interface specifications (Jitter and Wander applications)” on page 230
• “Optical jitter and wander specifications” on page 231
Electrical jitter and wander specifications
This section provides electrical jitter and wander specifications for the T-BERD / MTS
5800 and MSAM. For specifications, see:
• “Standards” on page 225
Receiver shutdown
2
2.5 Gbps option
10 Gbps long reach
-5.9 dBm
-5.9 dBm
Reflectance Per Telcordia
GR-253-CORE Issue 4-2005
Level measurement range
2.5 Gbps
622 Mbps
155 Mbps
- 6 to -30 dBm
-5 to -31 dBm
-5 to -31 dBm
Level measurement range for
10 Gbps
1310 nm and 1550 nm
IR RX
LR RX
850 nm
+0 to -17 dBm
-6 to -20 dBm
+0 to -14 dbm
Level measurement accuracy ±3 dB
Level measurement resolution 0.1dB
APS
resolution
accuracy 1ms
1ms
RTD
resolution
accuracy 1 μ s
2
μ
s
1. Remove the connector to clean the optical fiber.
2. Do not apply a greater than –8 dBm optical-level signal to the long reach receiver on the Dual Module Carrier, and
MSAM. Damage to the receiver may occur.
Table 139 Optical interface specifications (Non-Jitter/Wander) (Continued)
Item Description