manualshive.com logo in svg

Viavi T-BERD MTS 5800, Руководство по началу работы

Поделиться
Скачать
Viavi T-BERD MTS 5800 Скачать руководство пользователя страница 4

T-BERD/MTS/SC Getting Started Guide

Page ii

22046561, Rev. 016

March 2018

Notice

Every effort was made to ensure that the information in this manual was accurate at the 
time of printing. However, information is subject to change without notice, and Viavi 
reserves the right to provide an addendum to this manual with information not available 
at the time that this manual was created.

Copyright/Trademarks 

© Copyright 2018 Viavi Solutions Inc. All rights reserved. No part of this guide may be 
reproduced or transmitted, electronically or otherwise, without written permission of the 
publisher. Viavi Solutions and the Viavi logo are trademarks of Viavi Solutions Inc. 
(“Viavi”). 

The Bluetooth

®

 word mark and logos are registered trademarks owned by Bluetooth 

SIG, Inc. and any use of such marks by Viavi is under license.

All other trademarks and registered trademarks are the property of their respective 
owners. 

Copyright release 

Reproduction and distribution of this guide is authorized for US Government purposes 
only.

Ordering information

The catalog number for a printed getting started manual is ML-22046563. The catalog 
number for electronic manuals on USB is CEML-21138299.

Terms and conditions

Specifications, terms, and conditions are subject to change without notice. The provi-
sion of hardware, services, and/or software are subject to Viavi’s standard terms and 
conditions, available at 

www.viavisolutions.com/en/terms-and-conditions

.

Open Source Disclaimer - IMPORTANT READ CAREFULLY

The MSAM, CSAM, T-BERD / MTS 5800 family of instruments, and SC 4800/4800P 
include third party software licensed under the terms of separate open source software 
licenses.  By using this software you agree to comply with the terms and conditions of 
the applicable open source software licenses.  Software originated by Viavi is not 
subject to third party licenses.  Terms of the Viavi Software License different from appli-
cable third party licenses are offered by Viavi alone.

Содержание T-BERD MTS 5800









































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды