manualshive.com logo in svg

Viavi T-BERD MTS 5800, Руководство по началу работы

Поделиться
Скачать
Viavi T-BERD MTS 5800 Скачать руководство пользователя страница 278

Appendix B  

Maintenance and Troubleshooting

Assembly and setup

T-BERD/MTS/SC Getting Started Guide

Page 254

22046537, Rev. 016

March 2018

with the module, call the Technical Assistance Center (see 

“Technical assistance” on 

page xxii

).

Assembly and setup

The following issues may arise when assembling and setting up the instrument.

Which transceivers are compatible with the instrument?

A list of Viavi recommended optics is available by selecting the corresponding option 
from the Help menu on the user interface of your instrument. You can also see detailed 
information for the currently inserted SFP, XFP, QSFP+ or CFP on the Interface setup 
tab of the user interface.

Can I hot-swap MSAMs and CSAMs?

No, MSAMs and CSAMs are not hot-swappable. You must power down the instrument 
and unplug the AC power adapter before swapping MSAMs and CSAMs.

Can I hot-swap PIMs?

No, PIMs are not hot-swappable. You must turn the BERT module OFF before inserting 
or swapping PIMs.

Can I hot-swap transceivers?

Yes, all Viavi-qualified transceivers are hot-swappable.

Can I do dual port testing from a single SFP PIM?

No. Two SFP jacks are provided on the PIM to allow you to insert transceivers for 
different line rates or wavelengths 

without swapping SFPs

. This minimizes wear and 

tear on the SFPs. 

If you need to perform dual port tests, you need a dual port chassis and two SFP PIMs.

No signal is detected when running 10 GigE application

There are several reasons why a signal may not be detected:

•

Verify that the XFP transceiver is properly inserted.

Содержание T-BERD MTS 5800









































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды