manualshive.com logo in svg

Viavi T-BERD MTS 5800, Руководство по началу работы

Поделиться
Скачать
Viavi T-BERD MTS 5800 Скачать руководство пользователя страница 24

About this Guide

Safety and compliance information

T-BERD/MTS/SC Getting Started Guide

Page xxii

22046537, Rev. 016

March 2018

Safety and compliance information

Safety and compliance information for the instrument are provided in printed form and 
ship with your instrument. 

The MSAM and CSAM are part of a modular platform; therefore, the safety and compli-
ance information are provided with the base unit in the supporting base unit user 
manual (delivered in the equipment’s help system), with additional information in the 
printed 

T-BERD / MTS-6000 Getting Started Manual 

card or the 

T-BERD / MTS-8000 

Getting Started Manual

 card. The cards are shipped and delivered with their respective 

base units. 

For a 5800 and 4800 instruments, refer to the 

T-BERD 

⁄

 MTS 5800, SC 4800 and TEM 

Safety Information

 document that is shipped with the instrument.

Technical assistance

If you require technical assistance, call 1-844-GO-VIAVI. For the latest TAC informa-
tion, go to 

http://www.viavisolutions.com/en/services-and-support/support/technical-

assistance

. 

Table 3

Safety definitions 

Term

Definition

DANGER

Indicates a potentially hazardous situation that, if not avoided, 

will

 

result in death or serious injury. It may be associated with either a 
general hazard, high voltage, or other symbol. See 

Table 2

 for 

more information.

WARNING

Indicates a potentially hazardous situation that, if not avoided, 

could

 result in death or serious injury. It may be associated with 

either a general hazard, high voltage, or other symbol. See 

Table 2

 

for more information.

CAUTION

Indicates a potentially hazardous situation that, if not avoided, 
could result in minor or moderate injury and/or damage to equip-
ment.
It may be associated with either a general hazard, high voltage, or 
risk of explosion symbol. See 

Table 2

 for more information.

When applied to software actions, indicates a situation that, if not 
avoided, could result in loss of data or a disruption of software 
operation.

ALERT

Indicates that there is an action that must be performed in order to 
protect equipment and data or to avoid software damage and ser-
vice interruption.

Содержание T-BERD MTS 5800









































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды