Viavi T-BERD MTS 5800, Руководство по началу работы

Страница: 150 / 296

Chapter 4 Basic Testing
Running multiple tests
T-BERD/MTS/SC Getting Started Guide
Page 126 22046537, Rev. 016 March 2018
Restrictions
Certain applications require more system resources; therefore, your instrument may
not be able to run more than one application simultaneously, or you may need to
consider the temperature before running the tests.
Table 13 lists the applications that
are limited to a single test, or should be run at lower temperatures.
Table 13 Multiple Test Restrictions
Assembly Application Restriction
T-BERD / MTS
5800-100G Dual 100GE Maximum operating temperature:
0-40°C
Dual 10GE 0-50°C
MSAM in 6000A
Base Unit Ethernet Applica-
tions in Dual Term
or Dual Through
Mode Two SFP PIMs are required when running applications
in Dual Term or Dual Through mode; therefore, you can
only run one application at a time (using both PIMs).
VoIP Additional tests can not be run when running a VoIP
test.
IP Video Additional tests can not be run when running an IP
Video test.
L3 Triple Play Additional tests can not be run when running a layer 3
Triple Play test.
PRI ISDN Additional tests can not be run when running a PRI
ISDN test.
TCP Wirespeed Additional tests can not be run when running a TCP
Wirespeed test.
J-Profiler Additional tests can not be run when running a J-Profiler
test.
OTN Additional tests can not be run when running an OTN
test.
Data communica-
tions or Diphase The HS Datacom and Diphase PIMs require both PIM
ports on the MSAM chassis; therefore, you can only run
one application at a time (using a single PIM).
Any other applica-
tion at a line rate
less than 10 Gbps When running any application at a line rate less than
10 Gbps, you can run one additional test at a line rate
less than 10 Gbps while operating the instrument at:
– 32°F to 104°F (0°C to +40°C)