manualshive.com logo in svg

Viavi T-BERD MTS 5800, Руководство по началу работы

Поделиться
Скачать
Viavi T-BERD MTS 5800 Скачать руководство пользователя страница 279

Appendix B  

Maintenance and Troubleshooting

Operating the instrument

 

T-BERD/MTS/SC Getting Started Guide

March 2018

22046537, Rev. 016

Page 255

•

Turn the laser OFF, and then ON again.

•

If you are using an MSAM, verify that the MSAM chassis supports 10 GigE 
testing. If so, the panel will be labeled C1000 or C1004.

•

If you are using an MSAMv1, verify that the XFP PIM is inserted properly in Port 1. 
It will not work if it is inserted in Port 2. This restriction does not apply to the 
MSAMv2.

Operating the instrument

The following issues may present themselves when operating and performing basic 
functions using your instrument.

How much space is available for my data?

T-BERD / MTS 5800v1

There is roughly 1 GB of space available for storing data such as reports.

T-BERD / MTS 5800v2

There is roughly 1 GB of space available for storing data such as reports.

T-BERD / MTS 5800-100G

There is roughly 1 GB of space available for storing data such as reports.

SC 4800

There is roughly 1 GB of space available for storing data such as reports.

6000A Base Unit

There is roughly 512 MB of space available for storing data such as reports.

6000Av2 Base Unit

There is roughly 1 GB of space available for storing data such as reports.

8000 Base Unit

50% of the base unit hard drive is available for storing data such as reports. If the disk 
is full, you will be alerted to the situation when you attempt to save your data.

Содержание T-BERD MTS 5800









































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды