Viavi T-BERD MTS 5800, Руководство по началу работы

Страница: 19 / 296

About this Guide
Terminology
T-BERD/MTS/SC Getting Started Guide
March 2018 22046537, Rev. 016 Page xvii
• Assembly — Used throughout this manual to refer to a complete set of compo-
nents assembled as an instrument and used for testing.
– DMC assembly , consisting of a T-BERD ⁄ MTS 8000 base unit, an interme-
diary Dual Module Carrier (DMC), and up to two MSAMs with up to four Phys-
ical Interface Modules (PIMs, two per MSAM), or up to two CSAMs (requires
a DMC2).
– MSAM assembly , consisting of a either a T-BERD ⁄ MTS 6000A base unit
with a single MSAM and up to two PIMs, or a T-BERD ⁄ MTS 8000 base unit
with a DMCv2 and up to two MSAMs and up to four PIMs.
– CSAM assembly , consisting of either a T-BERD / MTS 6000Av2 base unit
with a single CSAM, or a T-BERD ⁄ MTS 8000 base unit with a DMCv2 and
up to two CSAMs.
– 5800, 5800-100G assembly , consisting of a T-BERD ⁄ MTS 5800 test instru-
ment and a battery module. Optional Optical Time Domain Reflectometer
(OTDR), or Timing Expansion Module (TEM) modules are also available for
the 5800. The 5800-100G and 5882 instruments have an internal GNSS
receiver.
– SC 4800 and 4800P assembly , consisting of a Smart Class 4800/4800P test
instrument and a battery module.
– Base unit — The unit which connects directly to the application module
(MSAM or CSAM), DMC (if applicable), and power adapter, providing the
user interface and a variety of connectivity and work flow tools. If optioned to
do so, the base unit also allows you to measure emitted power, received
power, and optical link loss on fiber optic networks.
• Battery Module — The module connected to the back of the T-BERD / MTS 8000
base unit, which supplies power whenever power is not provided using the AC
power adapter.
• Component — Used throughout this manual to refer to an individual hardware
component which is connected to the other components to build a complete test
instrument (assembly). This manual supports the following components: the
MSAM, CSAM, DMC, 5800 and SC 4800/4800P devices.
• CSAM 100G Services Application Module —Referred to generically as “the
instrument” when inserted in the T-BERD / MTS 6000A base unit or the DMCv2
and a T-BERD / MTS 8000 base unit. The CSAM provides testing functionality for
the base unit.
• DMC — Dual Module Carrier. The DMC is a two slot chassis which you can
connect to the T-BERD / MTS 8000 base unit to test using up to two MSAM appli-
cation modules and up to four PIMs, or up to two CSAMs (DMCv2 required).
• Expansion Module — A variety of expansion modules are available for some of
the 5800 family of instruments to provide additional functionality. Available expan-
sion modules are listed in
“Attaching an expansion module to the 5800v2/100G
and 5882” on page 40 .
• FC — Used to represent Fibre Channel on instrument connector panels and user
interface. Also identifies the optical ports used for Fibre Channel testing.
• MSAM Multiple Services Application Module — Referred to generically as “the
instrument” when inserted in the T-BERD / MTS 6000A base unit with at least one
PIM, or the DMC and T-BERD / MTS 8000 base unit with at least one PIM. The
MSAM and PIM provide testing functionality for the base unit.