Viavi T-BERD MTS 5800, Руководство по началу работы

Страница: 120 / 296

Chapter 4 Basic Testing
Preparing to test
T-BERD/MTS/SC Getting Started Guide
Page 96 22046537, Rev. 016 March 2018
2 Connect the ToD signal between the GPS receiver and the instrument.
–
For an 8000v1, connect the DB9-DB9 cable from the “Time Port” on the GPS
receiver to the DB9 connector on the T-BERD
⁄ MTS 8000, 6000A, and 5800
(see Figure 56 on page 94 or Figure 62 on page 97 ).
– For a 5800v1, connect the DB9 to RJ-45 cable from the “Time Port” on the
GPS receiver to the RJ-45connector on the 5800 (see
Figure 58 on page 95 ).
– For a 5800v2, 6000A or 8000v2, connect the DB9 to USB cable from the
“Time Port” on the GPS receiver to the USB port on the 6000A or 8000 (see
Figure 55 on page 93 , Figure 57 on page 94 , Figure 59 on page 95 ,
Figure 60 on page 96 , Figure 61 on page 97 , or Figure 63 on page 97 ).
Figure 60 GPS Connection Diagram - CSAM