TOWA LCM1010, Руководство по эксплуатации

Страница: 318 / 552

8 INTELLIGENT SYSTEM
LCM 1010 Instruction Manual
Setting Data
Detection Time (Common)
Set the time range to perform pressure failure detection.
Setting rangb is from 0.0 seconds to 29.9 seconds.
Failure detectionis carried out within the setting time range after
injection starts. Set starting time and ending time.
* In the case that completion time is “0.0” seconds,
& *
Failure detection will not Be carried out..,.
Spec Range (Force)
Set the allowable range for Clamp pressure.
Setting range is from 0.0 tons - 60.0 tons.
W hen the loaded data in the molding graph (Clamppressure) exceeds
the range o f the basic graph +/- setting pressure, an error will occur and
the machine will stop.
Spec Range (Position)
Set the allowable range for Clamp position.
Setting range is from 0.00 mm - 100.00 mm.
W hen the loaded data in the molding graph (Clamp position) exceeds
the range o f the basic graph +/- setting position, an error will occur and
the machine will stop.
Spec Range (FM pressure) -
«•«Л
«■ '*ij' f
Set the allowable range for FM pressure.
Setting range is from 0.0 torr - 100.0 top*
W hen the loaded data in the molding graplr(FM pregsiire) exceeds the
range o f the basic graph +/- setting,pressure, an error will occur and the
machine will stop.
Time Range (Common)
Set the time range to perform failure detection.
Setting range is from 0.0 seconds to 4.9 seconds.
Operations of Touch-Sensitive Screen
“OK” button Set the input data
“Cancel” button To return to previous screen
8-60
TSWA