TOWA LCM1010, Руководство по эксплуатации

Страница: 536 / 552

APPEND
Recipe Date (Press Module) LC
Recipe Data
Unit Name Parameter Name
Explanation
CURE TIME Sets the curing time at molding operation..............
PREHEAT TIME 1 (RECEIVE
Pos)
Sets the preheating time of resin at the receiving position. (For
removing volatile component.) If lack of resin melting causes some
errors, this should be set longer. If resin hardening causes some
errors, this should be set shorter.
PREHEAT TIME 2 (PREHEAT
Pos)
Sets the preheating time, of resin at the preheating position.
If lack of resin melting causes some errors, this should be set longe
If resin hardening causes some errors, this should be set shorter.
Cond i t i on
CHASE HOLDER CHANGE
PRESSURE
Sets the maximum reached pressure at the Chase Holder change mode.
The Clamp may not ascend at or more than this setting pressure in the
Chase Holder change mode.
CL Pos. CHASE HOLDER
CHANGE
Sets the speed shifting position at the Chase Holder change mode.
Ascending speed will be 1 mm/se^c (fixed) at or above the setting
oosition in the Chase Holder change mode.
CL Pos. CHASE CHANGE
Sets the maximum reached position at the Chase Holder change mode.
The Clamp may not ascend at or more fFTan this setting position in the
Chase Holder change mode.
FRAME VACUUM DESJRUCTION
TIME Sets thef absorption destruction time when products are transferred tc
the Unloader in the automatic ooeration.
FILM VACUUM DESTRUCTION
TIME
Sets the film absorption destruction time.
MOLDING SPEED 1
Sets the 1st molding speed.
Molding operation is carried out at this speed from the FM start
Dosition to the oosition to shift 1-2.
MOLDING SPEED SHIFT 1-2 Sets the sDeed shifting Dosition from the 1st sDeed to the 2nd speed.
MOLDING SPEED 2
Sets the 2nd molding speed.
Molding operation is carried out at this speed from the position to
shift 1-2 to the oosition to shift 2-3.
MOLDING SPEED SHIFT 2-3 Sets the speed shifting oosition from the 2nd speed to the 3rd speed.
MOLDING SPEED 3
Sets the 3rd molding speed.
Molding operation is carried out at this speed from the position to
shift 2-3 to the position to shift 3-4.
MOLDING SPEED SHIFT 3-4 Sets the speed shifting position from the 3rd speed to the 4th speed.
MOLDING SPEED 4
Sets the 4th molding speed.
Molding operation is carried out at this speed from the position to
shift 3-4 to the position to shift 4-5.
MOLDING SPEED SHIFT 4-5 Sets the speed shifting position from the 4th speed to the 5th speed.
Compress
MOLDING SPEED 5
Sets the 5th molding speed.
Molding operation is carried out at this speed from the position to
shift 4-5 to the oosition to shift 5-6.
MOLDING SPEED SHIFT 5-6 Sets the speed shifting oosition from the 5th speed to the 6th speed.
MOLDING SPEED 6
Sets the 6th molding speed.
Molding operation is carried out at this speed from the position to
shift 5-6 to the position to shift 6-7.
MOLDING SPEED SHIFT 6-7 Sets the speed shifting position from Л Й е .'6th speed to the 7th speed.
MOLDING SPEED 7
Sets the 7th molding speed. 'r '% .
Molding operation is carried out at this speed from the position to
shift 6-7 to the oosition to shift' 1 - S f • •
MOLDING SPEED SHIFT 7-8 Sets the speed shifting posit ion“fTom the 7th speed to the 8th speed.
MOLDING SPEED 8
Sets the 8th molding speed. ^
Molding operation is carried out at this.speed т'Тот the position to
shift 7-8 to the oosition to shift 8-9.
MOLDING SPEED SHIFT 8-9 Sets the speed shifting position from the 8th speed to the 9th speed.
MOLDING SPEED 9
Sets the 9th molding speed.
Molding operation is carried out at this speed from the position to
shift 8-9 to the oosition to shift 9-10.
MOLDING SPEED SHIFT 9-10 Sets the speed shifting position from the 9th speed to the 10th speed
MOLDING SPEED 10
Sets the 10th molding speed.
T£W A
APPENDI)