TOWA LCM1010, Руководство по эксплуатации

Страница: 100 / 552

LCM 1010 Instruction Manual
6 OPERATION
le a l
I
Г 1
le a l
1
Front Rear
1 After passing the film through the rollers as shown
, on the left, fasten the film to the empty roll with
adhesive tape,-&nd wind it by two or three turns.
(6) Close the press front cover, and keep the- [-©OVER] button pressed for 1 sec or
longer to lock the safety cover. . ,•
(7) Return the press to the origin. /
Select “ORG” using the Press select button 1. Then, press both of the “OPE”
button and “UP” button simultaneously (for 0.5 seconds or less).
(8) Wind the release film through manual operation. Select “FILM” with the
selection button 2.
For example, to wind the film on the right side, press either [UP] or [DOWN]
o f the right side operation button.
The film is fed by a specified amount (step feed) by pressing [UP]. The film is
continuously fed by keeping [DOWN] pressed.
To wind the film on the left side, press either [OPE] or [START/RESET] o f
the left side operation button.
NOTE Use the left operation button for the row type.
(9) Hang the film setup jig' on the hook at the bottom o f the front cover.
TSWA
6-11