TOWA LCM1010, Руководство по эксплуатации

Страница: 181 / 552

3 OUTLINE OF MACHINE
LCM 1010 Instruction Manual
3.2 Machine Specifications and Exterior Diagrams
3.2.1 Machine Specifications
Machine specifications are as follows. For detailed specifications o f parts and/or
equipment not listed belfiw, please refer to the appropriate written material from the
manufacturer(s) o f such parts ^and/or equipment.
NOTE The specifications indicated below are for use with four
Press Modules (Semi-Automatic).
Machine size
Body: 3510 mm (W) x 1400 mm (*D) x 1700 mm (H)
Machine weight
Body: Approx-. 8060 kg
* Refer to the Installation Manual regarding weight
measurements for each module
Ambient temp.
20 ~ 25°C (Fluctuation: ±l°C /hour or less)
Ambient humidity
35 ~ 65% (No condensation)
Electric source
Voltage: AC 200V 3 Phase (L I, L2, L3) +PE 50Hz/60Hz
Apparent Power (full): 4 press modules 35.0 kVA
Apparent Power (average): 4 press modules 21.0 kVA
Electrical Connection:
Terminals at right side in the lower part o f machine
Breaker Capacity: ELCB 3P 125A
Air source
Working Air Pressure: 0.45-0.6 M pa (4.4-5.9 kgf/cm2)
Low air pressure detection function
Manufacturer: SMC Model: IS1000M-40
Flow Rate: 500 Nl/min clean dry air
Connection Caliber: Piping female-tferead RC 1 /2rinch
Connection Location: frontright side m the lower part of machine
Exhaust duct
Required Exhaust Volume: ;
Resin Module 8 m 3/min I -?’
О
Press M odule 4 цу/min NOTE: for each Press
Exhaust Exit: Press Module
01 50m m duct /Protrusion amount: 150mm,1 unit / Press
Exhaust Exit: Resin Module
0 150m m duct / Protrusion amount: 150 mm, 1 unit
Ventilation duct Required Exhaust Volume: Resin Module 8 m 3/min
Exhaust Exit: Resin Module
0150m m duct / Protrusion amount: 150 mm, 1 unit
Press Unit
(Clamp)
Clamping Capacity: 29.4-98 kN (3.0-10.0 tf)
Speed: 0.1-50 mm/ sec
Stroke: 195mm (Servomotor drive)
Mold Die Temp.
Room Temperature - 200°C
A
CAUTION
3-2
- When the abovementioned air pressure and flow rates cannot be
ensured, impediments to device movements may result.
TCWA