TOWA LCM1010, Руководство по эксплуатации

Страница: 116 / 552

LCM 1010 Instruction Manual
6 OPERATION
(2) Stopping LINE AUTO operation
There are three ways to stop LINE AUTO operation.
In the LINE AUTO operation, press the STOP
button on the main operation panel and the L/F
supply from the IN slit magazine will stop, all L/Fs
in the machine will be molded and stored, and then
each o f the processes will stop.
(Clean out stop),
In the LINE A U JO operation, press the LINE
AUTO and the STOP buttons on the main operation
panel and the corresponding unit will stop after one
cycle operation.
(One-cycle stop)
In the LINE AUTO operation, press the LINE
AUTO and the STOP and the RESET buttons
simultaneously to stop the corresponding unit
immediately.
(Forced stop)
* However, while in the positioning process, the
axes will continue to move until positioning is
complete.
* The Press Module which is in the molding
(curing) operation will stop’at the current
position.
NOTE Normally, when the machine has no niore L/Fs to mold, the
operation will automatically stopped.
(Lot end stop)
T£W A 6-27