TOWA LCM1010, Руководство по эксплуатации

Страница: 93 / 552

6 OPERATION
LCM 1010 Instruction Manual
6.2 Insertion of Work; Related Items
This section contains information regarding procedures for insertion and removal o f work,
and adjustment procedures, as explained in the following subsections.
NOTE The Semi-Automatic/Automatic specification is common to
(1)-(9).
(1) Cover opening/closing procedure
(2) Setting up release film (Unwinding side)
(3) Removing release film (Winding side) -
(4) Release film winding procedure
(5) Substrate mounting procedure
(6) Substrate removing procedure
Refer to 6.2.1
Refer to 6.2.2
Refer to 6.2.3
Refer to 6.2.4
Refer to 6.2.5
Refer to 6.2.6
A
CAUTION
WARNING
When setting and removing the release film, use thorough caution.
Otherwise, your hand or body may be caught in the moving parts
near the release film unit, resulting in injury.
There are hot parts around the release film unit. If you touch these
parts carelessly, you may get burns and other damage to the body.
During work with these parts, wear globes (protective gear).
(7) Resin exchange procedure (Charging resin into the cartridge) Refer to 6.2.7
(8) Resin exchange procedure (Mounting the cartridge to the machine)Refer to 6.2.8
(9) Resin exchange procedure (Correcting procedure) Refer to 6.2.9
o.
’
NOTE The Automatic specification is showii as follows.
(10) IN/OUT Magazine Inserting/Removing Process Ref^r to 6.2.10
A
CAUTION
Be sufficiently careful during insertion and removal of the
magazines.
There is a danger of injury due to hands or other parts of ones body
getting caught by the parts that can move in the Magazine Unit
areas.
6-4 TSW A