Thermo Scientific Corona Veo, Руководство по эксплуатации

Страница: 214 / 262

8 • Troubleshooting
Page 214 Charged Aerosol Detectors Corona Veo (RS) Operating Manual
8.4 Warning and Error Codes
The tables list the most frequently observed warning and error codes for
the detector and provide troubleshooting assistance. Each code consists
of a code number and a message. The code number is the unique
identifier for the problem while the wording may change.
If you are unable to resolve a problem following the instructions in this
manual or if you encounter a code or message that is not listed in the
table, contact Thermo Fisher Scientific Technical Support for assistance.
8.4.1 Warning Codes
If a warning code appears, the following sequence of actions occurs:
•
A warning code appears on the display, starting with
1
.
•
The detector does not stop the running data acquisition.
•
The Status on the detector display indicates that a warning is active.
•
Certain soft key functions become available:
♦
Pressing the Mute Beep soft key turns off the beep for the
current alarm.
♦ Pressing the Continue soft key before the problem is resolved
bypasses the error/warning dialog and shows the Main Menu .
• If the detector is operated from a chromatography data system, such
as Chromeleon
The detector does not interfere with running sequences or batches.
Nevertheless, Thermo Fisher Scientific recommends taking
appropriate remedial action to resolve the problem.
Code and Messages Description and Remedial Action
If a warning appears, turn off the detector. Wait for 5 seconds and turn on the detector again. Check the self-
test results. Allow the detector to come to thermal stabilization.
If the message still appears, follow the instructions for the respective warning code below.
15000
Charger voltage failed The voltage of the charger approaches the maximum level.
Turn the detector off and on (see top line of the table). If the voltage still
fails, contact Technical Support.