Thermo Scientific Corona Veo, Руководство по эксплуатации

Страница: 74 / 262

5 • Installation
Page 74 Charged Aerosol Detectors Corona Veo (RS) Operating Manual
Connecting the USB Port
Depending on the connection option, follow the respective steps:
• If the detector is to be connected directly to the chromatography
software
Connect the detector to the data system computer via the USB port
on the rear panel.
For information about operation from the Chromeleon software, see
section 6.8, page 148 .
•
If the detector is to be operated in an UltiMate 3000 system
Connect the detector to an internal USB hub on the pump of the
UltiMate 3000 series (except the LPG-3400XRS pump).
♦
Thermo Fisher Scientific recommends connecting all modules to
the pump, and then connecting the system to the computer via
only one connection.
♦
If the system includes a UV detector in addition to the charged
aerosol detector, connect the UV detector directly to the
computer.
5.5.2.3
I/O Connection Terminals
The detector is equipped with two I/O terminals for connection to
•
a pump within the HPLC system, such as the UltiMate 3000 system,
to establish the
Pump Off connection
–and/or–
• other external devices, which can synchronize their operation with
the detector, such as an autosampler, a data station, or switching
valves.
The terminals include 7 connection ports (4 TTL inputs and 3 relay
outputs):
•
I/O terminal A comprises 2 relay outputs and 1 TTL input
• I/O terminal B comprises 3 TTL inputs and 1 relay output