Thermo Scientific Corona Veo, Руководство по эксплуатации

Страница: 162 / 262

6 • Operation
Page 162 Charged Aerosol Detectors Corona Veo (RS) Operating Manual
4. Turn off the detector with its main power switch.
5.
Detector shall be transported or shipped after shutdown
Prepare the detector for transport. Follow the instructions in
section 7.12 Removing the Detector from the System Stack,
page 200
.
Restarting the Detector
To restart the detector, follow these steps:
1. Prepare and restart the other modules in the system, following the
instructions in the Operating Manuals for the modules.
2. Flush the components in the flow path before the detector before
you connect the detector to the system flow path.
3. Turn on the detector with its main power switch.
4. Before starting an analysis, let the detector equilibrate and be sure
that it is ready for operation (see section 6.5 Preparing the Detector
for Operation, page 121 ).