Thermo Scientific Corona Veo, Руководство по эксплуатации

Страница: 151 / 262

6 • Operation
Charged Aerosol Detectors Corona Veo (RS) Operating Manual Page 151
Figure 30: Chromeleon 7 ePanel for an UltiMate system with Corona Veo
RS detector (example)
3. On the ePanel Set, click the tab for a module.
4. Use the controls (for example, buttons, sliders) to perform
commands.
5. If a function that you want to perform is not available on a panel,
press the F8 key to open the Command window. From this window,
you can access all commands that are available for the system.
TIP
The commands and parameters that are available in the
Command
window may vary, depending on the user level in the Command window
( Normal , Advanced , or Expert ). To change the user level, right-click in
the commands list and select a different user level.
Monitoring the Baseline
When an instrument is idle, you can monitor the baseline signals
without starting a sequence. During baseline monitoring, the monitored
signals are displayed on the real-time signal plot on the ePanel for the
module. You may have to add the signal to the plot in the Plot Properties
(for details, refer to the
Help ).