Thermo Scientific Corona Veo, Руководство по эксплуатации

Страница: 242 / 262

10 • Accessories, Consumables and Replacement Parts
Page 242 Charged Aerosol Detectors Corona Veo (RS) Operating Manual
Item Quantity
in
shipment
Capillary, Viper, 0.13 mm I.D., 350 mm length
For connection to an optical detector, for example in an UltiMate 3000
system. 1
Capillary, Viper, 0.13 mm I.D., 100 mm length
For connection between stream-switching valve and nebulizer. 1
Capillary, PEEK, 0.0015" x 1/16" I.D. x O.D., gray, 1.5 m length
In-line filter, stainless steel, with filter frit included 1
Fuses kit with 2 fuses (1A, 250 V AC, slow-blow, 5 x 20 mm) 1
Nut and ferrule set, stainless steel, 1/4" 1
Signal synchronization cable for connection to LPG-3400XRS pump 1
Signal cable, 6-pin miniDIN, length 5 m 1
10.2.2 Corona Veo Detector
Item Quantity
in
shipment
Detector drainage components for leak port and waste port:
Tee pieces 2
L pieces 4
Flexible hose, 11.4 mm x 8.3 mm O.D. x I.D., 2 m length 1
Tubing kit, including: 1
Gas inlet tubing, 1/8" x 1/4" I.D. x O.D., 2.5 m length 1
Gas exhaust tubing, consisting of
• Exhaust hose, 1/2" x 11/16" I.D. x O.D., 2.5 m length
•
Barb stem fitting, 1/2" x 3/8" I.D. x O.D. (pre-installed)
1
Capillary, PEEK, 0.005" x 1/16" I.D. x O.D., red, 2 m length 1
RheFlex fittings, PEEK, 1/16", finger-tight 4
Gas exhaust tubing adapter, inch to metric, 1/4" O.D. 1
Filter frits, stainless steel, porosity 0.5 µm 10
Tubing cutter 1
Digital I/O cable, 2-conductor 1