Thermo Scientific Corona Veo, Руководство по эксплуатации

Страница: 122 / 262

6 • Operation
Page 122 Charged Aerosol Detectors Corona Veo (RS) Operating Manual
1. Observe all mobile phase guidelines for the detector. See
section 6.5.1, page 123 .
2. Verify the nebulizer gas pressure setting. Set the nebulizer gas
pressure as specified on the nebulizer certificate. See section 6.5.2,
page 129 .
3. Equilibrate and prepare the other system modules (without the
detector) for sample analysis. See section 6.5.3, page 133 .
Verify that any air bubbles are completely flushed out of the system
flow path.
4. Turn on the detector gas flow and equilibrate the detector. See
section 6.5.4, page 135 .
Before Starting Sample Analysis
Before starting an analysis:
• Make sure that the pump flow rate that is delivered to the charged
aerosol detector is within the specified range. See
section 9.1,
page 236 .
•
Check the liquid level in the solvent reservoirs. Verify that the
amount of solvent is sufficient for the analysis.
•
Observe the same steps as upon first-time operation. See page 122 .