Thermo Scientific 43i, Инструкция по эксплуатации

Страница: 83 / 312

Operation
Instrument Controls Menu
Thermo Fisher Scientific Model 43i Trace Level-Enhanced Instruction Manual 3-45
The Analog Input Configuration menu displays a list of the 8 analog input
channels available for configuration. This screen is only displayed if the I/O
expansion board option is installed. Configuration includes entering
descriptor, units, decimal places, and choice of 2-10 table points, and
corresponding number of points selected.
In the Main Menu, choose Instrument Controls > I/O Configuration >
Analog Input Config .
The Descriptor screen allows the user to enter the descriptor for the
selected analog input channel. The descriptor is used in datalogging and
streaming data to report what data is being sent out. The descriptor may be
from 1 to 3 characters in length, and defaults to IN1to IN8 (user input
channel number).
In the Main Menu, choose Instrument Controls > I/O Configuration >
Analog Input Config > Select Channel >
Descriptor .
ANALOG INPUT DESCRIPTOR:
A SS
ABCDEFGHIJKLMN BKSP
OPQRSTUVWXYZ PAGE
0123456789 ./- SAVE
RANGE AVG DIAGS ALARM
The Units screen allows the user to enter the units for the selected analog
input channel. The units are displayed on the diagnostic screen and in
datalogging and streaming data. The units may be from 1 to 3 characters in
length, and defaults to V (volts).
In the Main Menu, choose Instrument Controls > I/O Configuration >
Analog Input Config > Select Channel >
Units .
Analog Input
Configuration
Descriptor
Units
ANALOG INPUT CONFIG:
>CHANNEL 1 IN1
CHANNEL 2 IN2
CHANNEL 3 IN3
CHANNEL 4 IN4
CHANNEL 5 IN5
CHANNEL 6 IN6
CHANNEL 7 IN7
ª
RANGE AVG DIAGS ALARM
CHANNEL 8 IN8
ANALOG INPUT 01 CONFIG:
>DESCRIPTOR IN1
UNITS V
DECIMAL PLACES 2
TABLE POINTS 2
POINT 1
POINT 2
RANGE AVG DIAGS ALARM