Thermo Scientific 43i, Инструкция по эксплуатации

Страница: 270 / 312

C-Link Protocol Commands
Measurement Configuration
B-30 Model 43 i Trace Level-Enhanced Instruction Manual Thermo Fisher Scientific
Send: gas mode
Receive: gas mode sample
set sample
set sample gas
This command sets the zero/span valves to the sample mode. The example
that follows sets the instrument to sample mode, that is, the instrument is
reading the sample gas.
Send: set sample
Receive: set sample ok
set zero
set zero gas
This command sets the zero/span valves to the zero mode. The example
that follows sets the instrument to zero mode that is, the instrument is
reading the sample gas.
Send: set zero
Receive: set zero ok
set span
set span gas
This command sets the zero/span valves to the span mode. The example
that follows sets the instrument to span mode that is, the instrument is
sampling span gas.
Send: set span
Receive: set span ok
gas unit
This command reports the current gas units (ppb or μ g/m
3
). The example
reports that the gas unit is set to ppm.
Send: gas unit
Receive: gas unit ppm
set gas
unit
unit = | ppm | mg/m
3
|
This command sets the gas units to ppm or mg/m
3
. The example that
follows sets the gas units to mg/m 3 .
Send: set gas unit mg/m3
Receive: set gas unit mg/m3 ok