Thermo Scientific 43i, Инструкция по эксплуатации

Страница: 44 / 312

Operation
Software Overview
3-6 Model 43i Trace Level-Enhanced Instruction Manual Thermo Fisher Scientific
The Power-Up screen is displayed on power up of the Model 43 i Trace
Level-Enhanced . The Self-Test is displayed while the internal components
are warming up and diagnostic checks are performed.
The Run screen displays the SO
2
concentration. The status bar displays
time and alarm status, and optional zero/span sample solenoid valves, if
installed. The word “SAMPLE” on the bottom left of the display indicates
the analyzer has the span/zero valve option and is in “SAMPLE” mode.
Other modes appear in the same area of the display as “ZERO” or
“SPAN”. For more information about the optional solenoid valves, see
Chapter 9, “Optional Equipment”.
When operating in dual or auto range mode two sets of coefficients are
used to calculate the CO “High” and “Low” concentrations. Also, two
averaging times are used—one for each range. The title bar indicates which
range concentrations are displayed. The words “LOW RANGE
CONCENTRATION” on the top of the display indicates that the low
concentration is displayed. In dual range mode, pressing the
and
arrows will toggle between high and low concentrations. The
example that follows shows the Run screen in single range mode.
X CONCENTRATION W
NO 28.7
PPB
SO
2
25.5
PPB
NO
x
29.2
PPB
SAMPLE 12:34 ALARM x
RANGE AVG DIAGS ALARM
The Main Menu contains a number of submenus. Instrument parameters
and features are divided into these submenus according to their function.
Power-Up Screen
Run Screen
Main Menu