Thermo Scientific 43i, Инструкция по эксплуатации

Страница: 277 / 312

C-Link Protocol Commands
Communications Configuration
Thermo Fisher Scientific Model 43 i Trace Level-Enhanced Instruction Manual B-37
Send: format
Receive: format 00
set format format
This command sets the reply termination format , where format is set
according to Table B–9 . The example that follows sets the reply
termination format to checksum.
Send: set format 01
Receive: set format 01 ok
Table B–9. Reply Termination Formats
Format
Reply Termination
00 <CR>
01 <NL> sum xxxx <CR>
where xxxx = 4 hexadecimal digits that represent the sum of all the
characters (bytes) in the message
host name
This command reports the host name string.
Send: host name
Receive: host name analyzer01
set host name
string
This command sets the host name string , where string is 1-13 alphanumeric
characters.
Send: set host name analyzer01
Receive: set host name analyzer01 ok
instr name
This command reports the instrument name.
Send: instr name
Receive: instr name
SO2 Analyzer
SO2 Analyzer
instrument id
This command reports the instrument id.
Send: instrument id
Receive: instrument id 12