Thermo Scientific 43i, Инструкция по эксплуатации

Страница: 70 / 312

Operation
Instrument Controls Menu
3-32 Model 43i Trace Level-Enhanced Instruction Manual Thermo Fisher Scientific
COMMUNICATION PROTOCOL:
CURRENTLY: CLINK
SET TO: STREAMING ?
©ª
CHANGE VALUE
ƒ SAVE VALUE
RANGE AVG DIAGS ALARM
The Streaming Data Configuration menu is used to allow for configuration
of the 8 streaming data output items, streaming interval, current data
format, and current timestamp setting. The Choose Item Signal submenu
displays a list of the analog output signal group choices to choose from.
Choices are Concentrations, Other Measurements, and Analog Inputs (if
the I/O expansion board option is installed).
Note Add Labels and Prepend Timestamp are toggle items that change
between yes or no when selected. ▲
In the Main Menu, choose Instrument Controls > Communication
Settings >
Streaming Data Config .
STREAMING DATA CONFIG:
>INTERVAL 10 SEC
ADD LABELS NO
PREPEND TIMESTAMP YES
ITEM 1 SO2
ITEM 2 INTT
ITEM 3 RCTT
ITEM 4 PRES
ª
RANGE AVG DIAGS ALARM
ITEM 5 SMPLFL
ITEM 6 NONE
ITEM 7 NONE
ITEM 8 NONE
The Streaming Data Interval screen is used to adjust the streaming data
interval. The following interval times are available: 1, 2, 5, 10, 20, 30, 60,
90, 120, 180, 240, and 300 seconds.
In the Main Menu, choose Instrument Controls > Communication
Settings > Streaming Data Config >
Streaming Data Interval .
Streaming Data
Configuration
Streaming Data Interval