Thermo Scientific 43i, Инструкция по эксплуатации

Страница: 262 / 312

C-Link Protocol Commands
Datalogging
B-22 Model 43 i Trace Level-Enhanced Instruction Manual Thermo Fisher Scientific
set copy lrec to sp
set copy srec to sp
set copy stream to sp
These commands copy the current contents of the long record, short
record, or streaming data list into the scratch pad (sp). These commands
are useful in easy modification of current long record, short record, or
streaming data lists. The example that follows copies the current list of long
records into the scratch pad.
Send: set copy lrec to sp
Receive: set copy lrec to sp ok
sp field number
This command reports the variable number and name stored at index in the
scratch pad list. The example that follows shows that the field 1 in the
scratch pad is set to index number 3, which is for the variable SO
2
concentration.
Send: sp field 1
Receive: sp field 1 1 so2
set sp field number value
number = 1-32 is the maximum number of fields in long and short record
lists.
number = 1-18 is for streaming data lists.
This command sets the scratch pad field number (item number in scratch
pad list) to value , where v alue is the index number of a variable in the
analog out variable list. Available variables and their corresponding index
numbers may be obtained using the command “list var aout”. The “set sp
field” command is used to create a list of variables which can then be
transferred into the long record, short record, or streaming data lists, using
the “set copy sp to lrec”, “set copy sp to srec”, or “set copy sp to stream”
commands.
Send: set sp field 1 34
Receive: set sp field 1 34 ok
stream per
This command reports the currently set time interval in seconds for
streaming data.
Send: stream per
Receive: stream per 10