Thermo Scientific 43i, Инструкция по эксплуатации

Страница: 80 / 312

Operation
Instrument Controls Menu
3-42 Model 43i Trace Level-Enhanced Instruction Manual Thermo Fisher Scientific
Note The current outputs are displayed only if the I/O expansion board
option is installed. ▲
In the Main Menu, choose Instrument Controls > I/O Configuration >
Analog Output Config .
The Select Output Range screen is used to select the hardware range for the
selected analog voltage output channel. Possible ranges for the voltage
outputs are: 0-100 mV, 0-1, 0-5, 0-10 V.
In the Main Menu, choose Instrument Controls > I/O Configuration >
Analog Output Config > Select Channel >
Select Range .
SELECT OUTPUT RANGE:
SELECTED OUTPUT: V 1
CURRENTLY: 0-10V
SET TO: 0-5V ?
©ª CHANGE VALUE ƒ SAVE
RANGE AVG DIAGS ALARM
The Minimum Value screen is used to edit the zero (0) to full-scale (100)
value in percentages for the selected analog output channel. See Table 3-7
for a list of choices. In dual or auto range mode, “HI” or “LO” is displayed
to indicate high or low concentrations. Range Status is visible only in auto
range mode. The minimum and maximum output value screens function
the same way. The example that follows shows the set minimum value
screen.
Select Output Range
Minimum and Maximum
Value
OUTPUT CHANNELS:
>ALL VOLTAGE CHANNELS
ALL CURRENT CHANNELS
VOLTAGE CHANNEL 1
VOLTAGE CHANNEL 2
VOLTAGE CHANNEL 3
VOLTAGE CHANNEL 4
VOLTAGE CHANNEL 5
ª
RANGE AVG DIAGS ALARM
VOLTAGE CHANNEL 6
CURRENT CHANNEL 1
CURRENT CHANNEL 2
CURRENT CHANNEL 3
CURRENT CHANNEL 4
CURRENT CHANNEL 5
CURRENT CHANNEL 6
ANALOG OUTPUT CONFIG:
>SELECT RANGE
SET MINIMUM VALUE
SET MAXIMUM VALUE
CHOOSE SIGNAL TO OUTPUT
RANGE AVG DIAGS ALARM