Thermo Scientific 43i, Инструкция по эксплуатации

Страница: 72 / 312

Operation
Instrument Controls Menu
3-34 Model 43i Trace Level-Enhanced Instruction Manual Thermo Fisher Scientific
In the Main Menu, choose Instrument Controls > Communication
Settings > Streaming Data Config > Select Item >
Other Measurements .
OTHER MEASUREMENTS:
>NONE
INT TEMP <--
CHAMBER TEMP
PERM OVN GAS
PERM OVN HTR
CHAMBER PRES
SAMPLE FLOW
ª
RANGE AVG DIAGS ALARM
PMT VOLTS
FLASH VOLTS
FLASH REF
The Analog Inputs screen allows the user to select the analog input signal
(none or analog inputs 1-8) that is tied to the selected streaming data item.
The selected item is shown by “<--” after it.
In the Main Menu, choose Instrument Controls > Communication
Settings > Streaming Data Config > Select Item >
Analog Inputs .
ANALOG INPUTS:
>NONE
INPUT 1 <--
INPUT 2
INPUT 3
INPUT 4
INPUT 5
INPUT 6
ª
RANGE AVG DIAGS ALARM
INPUT 7
INPUT 8
The RS-232/RS-485 Selection screen allows the user to choose between the
RS-232 or RS-485 specification for serial communication.
Equipment Damage Disconnect the serial cable before changing RS-232
and RS-485 selection to prevent damage to the connected equipment. ▲
Analog Inputs
RS-232/RS-485 Selection