Thermo Scientific 43i, Инструкция по эксплуатации

Страница: 7 / 312

About This Manual
Thermo Fisher Scientific Model 43 i Trace Level-Enhanced Instruction Manual vii
Alert Description
internal component.
▲
This adjustment should only be performed by an
instrument service technician.
▲
Handle all printed circuit boards by the edges only.
▲
Do not remove the panel or frame from the LCD module.
▲
The LCD module polarizing plate is very fragile, handle it
carefully.
▲
Do not wipe the LCD module polarizing plate with a dry
cloth, it may easily scratch the plate.
▲
Do not use Ketonics solvent or aromatic solvent to clean
the LCD module, use a soft cloth moistened with a
naphtha cleaning solvent.
▲
Do not place the LCD module near organic solvents or
corrosive gases.
▲
Do not shake or jolt the LCD module.
▲
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own
expense
.
▲
The following symbol and description identify the WEEE marking used on
the instrument and in the associated documentation.
Symbol Description
Marking of electrical and electronic equipment which applies to electrical and
electronic equipment falling under the Directive 2002/96/EC (WEEE) and the
equipment that has been put on the market after 13 August 2005.
▲
FCC Compliance
WEEE Symbol