Siemens SINAMICS S150 NEMA, Руководство по эксплуатации

Страница: 224 / 862

Commissioning
5.3 Procedure for commissioning with STARTER
Enclosed Drives
222
Operating Instructions, 12/2018, A5E36652151A
Note
Commissioning of an induction motor
The steps described below also apply to commissioning an induction motor.
When commissioning a permanent-magnet synchronous motor, there are a few special
conditions that apply, which are detailed in a separate chapter (see "Setpoint channel and
closed-loop control / permanent-magnet synchronous motors").
⇒ Click Next >
Configuring the motor – Entering motor data
Figure 5-21 Configuring the motor – Entering motor data
⇒ Enter the motor data (see motor rating plate).
⇒ Activate Enter optional motor data if necessary.
⇒ Activate Enter optional equivalent circuit diagram data if necessary.